D5D NTSC/PAL to Serial Decoder The D5D Decoder provides low cost, all digital decoding of analog NTSC/PAL or Y/C (S-Video) to SDI. The D5D is useful for bringing video from time-base corrected analog composite equipment into a serial digital environment. The D5D features a crystal PLL jitter filter/memory to reduce jitter in the SDI outputs. The D5D decodes the full dynamic range of input video. Values below black and above white are not clipped. In the NTSC mode, the removal of the 7.5 IRE pedestal can be enabled by external dip-switch selection.

D5DA Serial Distribution Amplifier The D5DA is a multi-format, 1x4 reclocking SDI Distribution Amplifier. The D5DA can be used as a low cost SDI DA or repeater. The SDI input is re-clocked and equalized to 300 meters of cable. In addition, the multi-standard feature allows the D5DA to automatically adapt to 143, 177, 270, or 360Mb SDI inputs.

D5PSW SDI Protection Switch The D5PSW accepts 2 SDI inputs, Primary and Secondary, and automatically switches to the Secondary input if the Primary input is not present or is not a valid SDI signal. An SDI input is considered valid if a proper SMPTE 259 stream is present. A LED indicator is Green if both Primary and Secondary are present, flashing green if the Primary is present but the Secondary is not present, and Orange if the Secondary is present but the Primary is not. The D5PSW has 3 SDI outputs.

Ultralight Control Systems 3" Double Arm Ball.

Ultralight Control Systems 5" Double Ball Arm

Ultralight Control Systems - 8" Double Ball Arm

Ultralight Control Systems 12" Double Ball Arm fits into the Ultralight Control Systems' clamps.

The DB-16 16" Double Ball Arm is designed to fit into the Ultralight Control Systems' clamps. They're machined from 6061-T6 aluminum and hard anodized.

DECIMATOR: Extremely low cost miniature 3G/HD to NTSC/PAL down converter with ARC and SD pass-through.

Cine Arm is an upgraded version of the Noga Hold-it Articulating Arm. The heart of the device is its single central locking knob that simultaneously locks all 3 joints.

Two mounts in one! The monitor mount is a hotshoe ball mount. Just unscrew the ball mount from the arm & you have a standard hotshoe mount. Allows the use of the hotshoe mount for both a light or other accessory and a monitor.

Dual Hotshoe Adapter with 360 degree rotation. Allows the use of the hotshoe mount for both a light and another Hotshoe mountable accessory.

Model DWP
The DWP is a miniature, high quality switching power supply for all of AJA's H-series and D-series stand alone products. Custom manufactured for AJA, the DWP is so small it does not cover the adjacent socket in power strips. With a 2x power over-rating and a molded, latching, circular connector with gold pins, the DWP meets the high reliability requirements of the professional video industry.

DWP Power Supply, 12 volt (for 12 volt D10 products only)

The DWP-U is an in-line universal input version that can accept a power cord anywhere in the world (power cord not supplied by AJA). This makes the DWPU ideal for use with custom power cord applications and for many countries outside of North America.

Interchangeable/replaceable Canon face plate for use with NEBTEK Lithium-Ion Battery Adapter base

Interchangeable/replaceable JVC face plate for use with NEBTEK Lithium-Ion Battery Adapter base

Interchangeable/replaceable Panasonic face plate for use with NEBTEK Lithium-Ion Battery Adapter base

Interchangeable/replaceable Sony L face plate for use with NEBTEK Lithium-Ion Battery Adapter base

Interchangeable/replaceable Sony M face plate for use with NEBTEK Lithium-Ion Battery Adapter base